Jump to content

Recommended Posts

Posted
33 minutes ago, RidgeRacer said:

Come over! Warning though. I'll likely act like a lunatic one way or the other. Ask Dan about the Falcons vs Patriots SB that we watched in the way to Utah. Lol

To be fair, that was a hell of a game and one that warranted being a lunatic. I’d put it up there with the interception vs the Seahawks on the list of best superbowls In the last 15 years. 

  • Like 1
Posted (edited)

hard to tell with 100% certainty, but ecom site looks like they've sold 300 midday 4hr passes and 350 8hr passes from 8:20 until now

it's a newer system than in the past and i didn't have any interest in looking at it until today

Edited by Benm
  • Like 1
Posted
2 hours ago, RidgeRacer said:

No crust here however I did have a scare yesterday the blower pull thingy wasn't pulling. I said "No. Not today". I wasn't shoveling 2 feet and the game started at 3. So I channeled my inner @JFskiDan and I said "I'm gonna fix this with my bare hands if I have to. LFG".. Turned the blower upside down and got my hands dirty, like a true mechanic. Turns out a spring thingy popped so I connected the spring to one of the metal thingys that apparently pulls upward when you pull on the pull thingy. Boom! We were in business. The snow was no match after that.

I think the first thing a true mechanic would do is NOT turn the thing with oil and gas upside down 😂

We still need @JFskiDan to chime in because I am a YT mechanic at best but I'm proud of you for your engineering prowess Ridge

  • Like 1
  • Haha 1
Posted
2 minutes ago, mute1080 said:

I think the first thing a true mechanic would do is NOT turn the thing with oil and gas upside down 😂

We still need @JFskiDan to chime in because I am a YT mechanic at best but I'm proud of you for your engineering prowess Ridge

Im surprised it started after being upside down. Usually the oil gets in the cylinder, and causes problems. Not to mention where the gas might go. 

  • Like 1
  • Thanks 1
Posted
55 minutes ago, indiggio said:

What a CF!  OG6 looks like it's down.  SS6 and quad are loading.

CF is right. They're making that Johnny Cash today

  • Like 2
Posted
15 minutes ago, mute1080 said:

CF is right. They're making that Johnny Cash today

Lots of people I talked to were ikon

  • Haha 1
Posted
43 minutes ago, mute1080 said:

I think the first thing a true mechanic would do is NOT turn the thing with oil and gas upside down 😂

We still need @JFskiDan to chime in because I am a YT mechanic at best but I'm proud of you for your engineering prowess Ridge

In my defense. It wasn't upside down. Poor choice of words in my part. It was on its side. Tank was almost empty. I filled it after completing the repair. Lol

Posted
1 hour ago, Kyle said:

To be fair, that was a hell of a game and one that warranted being a lunatic. I’d put it up there with the interception vs the Seahawks on the list of best superbowls In the last 15 years. 

Well thank you sir. SB 52 wasn't just a great game. It was the single greatest game in any sport ever played... going back to the ancient greeks in Athens. 

Posted

Due to extenuating circumstances,  and a delay behind a 5 mph plow on the way up, Grayson and i didn' tpull into the lot until about 11:53. At which point I laughed, circled though our row and pulled back out of the lot. Fuck that noise, lol.

  • Boner City 1
  • Haha 7
Posted (edited)
2 hours ago, mute1080 said:

I think the first thing a true mechanic would do is NOT turn the thing with oil and gas upside down 😂

We still need @JFskiDan to chime in because I am a YT mechanic at best but I'm proud of you for your engineering prowess Ridge

sometimes you have to do what you have to do. people say to put plastic wrap or whatever between the cap and container but it has never caused me a problem.

i was just fixing mine while out in the field like an hour and a half ago. second time, same issue but at least now i've IDed what's causing it... well maybe. it might be an issue of a NOS part... or that there's too much tension on the drive and it's actually engaged when i think its not

just a PSA - do not change gears while drive is engaged.

image.png.19769bcad66fddd15a8145b03846d814.png

Edited by Benm
  • Like 1
Posted
17 hours ago, Benm said:

sometimes you have to do what you have to do. people say to put plastic wrap or whatever between the cap and container but it has never caused me a problem.

i was just fixing mine while out in the field like an hour and a half ago. second time, same issue but at least now i've IDed what's causing it... well maybe. it might be an issue of a NOS part... or that there's too much tension on the drive and it's actually engaged when i think its not

just a PSA - do not change gears while drive is engaged.

 

I got my snowblower running Saturday at about 9pm, just in time, lol. Tried to clean the carb Friday  but when I put it all back together it was leaking gas all over the floor of the garage. Thankfully I had ordered a replacement carb from Amazon on Thursday for delivery Saturday, and thankfully it made it on time. 

Ran like a champ, but also having drive issues. When I switch between forward and reverse, the transmission sticks until I give the machine a jolt, like shake it or a quick bounce. It was doing it since it was brand new and I never dealt with it. I can work with it, but I should probably get it looked at. I tried the friction plate adjustment procedure from the manual, but no luck. Needs a professionals touch, lol

Posted
17 hours ago, Benm said:

sometimes you have to do what you have to do. people say to put plastic wrap or whatever between the cap and container but it has never caused me a problem.

i was just fixing mine while out in the field like an hour and a half ago. second time, same issue but at least now i've IDed what's causing it... well maybe. it might be an issue of a NOS part... or that there's too much tension on the drive and it's actually engaged when i think its not

just a PSA - do not change gears while drive is engaged.

image.png.19769bcad66fddd15a8145b03846d814.png

@RidgeRacer

im not sure if its a Honda only thing, but the guys at work tip shit over like crazy.  And then after a few hours or days, they tip them back over, and they wont start, cause now oil has gone past the rings into the cylinder, and they wont fire and sometimes have enough oil they get hydrolocked, which usually you find that out with one aggressive pull on the starter rope and it jumps out of your hand and leaves your hand all numb and stingy.  so if you ever tip it over, and it wont start, pull the plug, and give it a spin to see if oil comes shooting out the plug hole.  then you need to drown it in carb cleaner and a new plug to normally get them going again.  Just a psa, might not happen, but im always leary of tipping small engines over for that matter.  

my blower at home runs ok, but kinda started running a little ruff towards the end, so i ordered a cheap Chinese carb to have on hand, cuase Tecumseh carbs are notorious for being throw away carbs.  Cant really plow my driveways at home, and shoveling that mess yesterday would have sucked huge balls.  gotta keep the blower happy.  

  • Like 3
  • Thanks 1
Posted (edited)
24 minutes ago, enjoralas said:

I can work with it, but I should probably get it looked at. I tried the friction plate adjustment procedure from the manual, but no luck. Needs a professionals touch, lol

i'd try having it running with the drive disengaged, lifting up on the handles so that the wheels are off the ground to see if there's still contact with the wheel/plate (the tires will spin). if that happens i'd remove some of the tension until the wheels stop. if that's not the case, id open it up in a clean environment, run it (carefully) and try to see what's happening. re-greasing everything might help, but might as well do that anyway its good preventative care. i gave mine a bath in grease when i fixed it originally.
 

  

5 minutes ago, JFskiDan said:

im always leary of tipping small engines over

same

Edited by Benm
Posted
On 1/26/2026 at 12:17 PM, Benm said:

hard to tell with 100% certainty, but ecom site looks like they've sold 300 midday 4hr passes and 350 8hr passes from 8:20 until now

it's a newer system than in the past and i didn't have any interest in looking at it until today

This new system is on my nerves too. I found it when I went to buy Walter a snowtubing ticket for last Sunday. It had by login already, so i could log in. But says I have no pass. I tried linking my webcode, says already claimed. But it let me link both my kids as Friends and Family. That's actually a plus in that before I couldn't see anything about them, like vouchers, etc, except that I could choose them in a drop down to buy stuff for. But what a cluster if every passholder with a login is going to have to manually reach out to them in order to get their account straightened out

 

Posted
1 hour ago, JFskiDan said:

i think this is where we were a week ago, with the previous storm.  should be interesting

 

image.png.a6b1cbe2a2e1d64689343c005e0eb764.png

Blue is already closed in anticipation......wild winter we are having one or two more is all time territory for PA.

  • Like 2
  • Boner City 1
  • Haha 4
Posted
Just now, Johnny Law said:

Blue is already closed in anticipation......wild winter we are having one or two more is all time territory for PA.

I was debating if this past weekend was enough for stuff like the Burma woods to be firmly in play, but wasn't sure. I know 3 seasons ago, I think it was, it was 6-8 inches more I believe when peeps were back there. But if we get another 6+ this coming weekend, with no real melt off cause temps, even more off-trail in play is awesome.

  • Like 1
Posted (edited)
1 hour ago, Johnny Law said:

Blue is already closed in anticipation......wild winter we are having one or two more is all time territory for PA.

@shopey1080 this is great 

Edited by saltyant

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...